Solar Water Heater (100L-300L)

Solar water heater
Products Features and Specification:
Abundant amount of hot water can be used for diversified purposes including washing hand, washing dishes, cleaning vegetables, laundry, bathing etc to meet the demands for multipurpose water consumption at home.
Specific high-temperature tube for strong heat-accumulating capability is a kind of "three high" vacuum tube made by use of the special coating technology, with increase of 20% in heat, higher heat-accumulating efficiency and stronger thermal force.
With super insulation performance heat, it can sustain the heat of the water longer. The thickened insulation layer made by the fully automated constant-temperature, high-pressure and foaming technology is good in insulating effect and more sustainable in service life after high-temperature curing treatment, which can rotate at 360 degrees, with no dead angle.
Equipped with the anti-corrosion tank, it can have a longer service life. Made of SUS304-2B Food grade thickened stainless steel, it can have a good performance for anti-corrosion.
The anti-freezing pipeline will be not blocked due to freezing in winter to guarantee the relative invariableness of water temperature in pipeline, which is always not less than the set valve.
Installed with full set of original accessories, it is longer in service life and better in performance; Application of original standard spare parts can match the anti-freezing, can ensure the user normal use in winter.
Main Technical data:
1 Evacuated Solar Collector Tube: Made of high-borosilicate glass, with aluminum absorption layer of magnetron sputtering
2 Specification(tube): Diameter 47-1500mm, 58-1800mm
4 Inner tank material: SUS304-2B stainless steel, 0.6mm 0.5mm 0.4mm
5 Outer tank material: Stainless steel, color coated sheet, 0.5mm 0.4mm
6 Insulation layer: Polyurethane thermal protection layer about 50-60mm
7 Collectors: 47-1500mm, 58-1800mm vacuum tubes
8 Bracket: Stainless steel, color-coated sheet, alloyed aluminum
9 Heat preservation: 72 hours
10 Hail resistance: 20-30mm
11 Fastness: Stainless steel screw
12 Seal: Silicone Rubber Polymer
13 Max Water Temperature: Can reach 95 degree
14 Circulation: Direct /open loop (passive)
15 Heating System: Thermosyphon (Passive)
16 Connection Type: Direct-plug
17 Heat pipe material: Copper
18 Absorption Rate: ≥ 0.95± 0.02
19 Emission Rate: ≤ 0.20± 0.02
20 Vacuum Tightness: P≤ 5.0*0.0001PA
21 Idle sunny property parameters: Y=220-260. /KW
22 Average heat loss efficient: Ult=0.6-0.7W(. )
23 Capacity: 100-300L